Description
Knight HTV’s Foil Metallic HTVs are very easy to use and give a soft, flexible finish – which is quite different to Chrome Metallic HTV.
The Foil Metallics all have a sticky in-built transfer film, and are super easy to weed. Foil Metallics are gentle on your blades and do not require double passes/cuts.
Like all of Knight HTV’s heat transfers, the Foil Metallics are primarily for use on cotton & polyester, however can be used on other products so long as it can withstand the heat & pressure requirements.
If you are just starting out, or just want to see what all of the fuss is about, you can use an iron instead of a heat press. You can even use scissors or a scalpel instead of a cutter- just remember to cut your design in mirror image! All you really need is some HTV, scissors, and iron and your imagination!
Please Note: If purchasing multiple metres of one colour, the length will be a FULL 2, 3, 4 metres etc, not cut separately, unless there is limited stock/unforeseeable circumstances. The benefit to having full rolls is to reduce wastage for customers through having less off-cuts, and also it makes it easier when using wide format cutters. If you would prefer the meters cut to each metre (if sharing an order with a friend to save on postage, for example) then please write this in the “Note” section at the Checkout 🙂
Please note that we have done our best to get accurate photos of our products, however due to variations in screens & cameras, colours can show a little differently to the actual colour of the product.
SETTINGS:
Temp: 140 degrees celcius
Time: 10-15 seconds
COOL PEEL
Garment Care:
Do Not Bleach
Do Not Tumble Dry
Cool wash only
Gentle cycle
Wash & Hang Inside Out
Do not soak
Iron Inside Out if Necessary
Reviews
There are no reviews yet.